Banner

Light Color CSA BINDER

Introduction
LIGHT COLOR CSA BINDER with grade 82.5Mpa, is a hydraulic binder based on calcium sulfo aluminate, specially designed to be blended with anhydrite and some other materials, such as sand, crashed stone, pigments to make artificial stone & countertops by Polar Bear plant in year 2000.

This binder is manufactured under a strict quality assurance systems GB/T 19001-2000(i.e. ISO9001:2000) and GB/T 240001-1996(i.e. ISO 14001:1996) which accommodates the technical requirements of building chemistry formulators.
Properties

Hydraulic Properties

The characteristics of LIGHT COLOR CSA BINDER have been tested in accordance with the Chinese standards: GB20472-2006.

Setting time determined at 20℃, using Vicat needle according to GB/T 1346-2001.

Mechanical strength at 20℃, 95% relative humidity according to GB20472-2006 .

 

Item

    LIGHT COLOR CSA BNIDER TYPE II

Bending Strength (Mpa)

1d

≥ 7.0

3d

≥ 9.0

7d

≥ 10.0

Compressive strength (Mpa)

1d

≥ 50.0

3d

≥ 75.0

7d

≥ 85.0

 Setting time

Initial

≥ 25min

Final

≤ 300min

  • Data

    Chemical Analysis

    The chemical analysis of LIGHT COLOR CSA BINDER has been determined according to the following:

    GB/T 176-1996 Methods of chemical analysis for cement

    Main constituents (%)

     

    Component

    SiO2

    Al2O3

    Fe2O3

    CaO

    MgO

    SO3

    TiO2

    LIGHT COLOR CSA BNIDER TYPE II

    ≤8.5

    ≥35

    1.5-3.5

    40.5-42.5

    ≤ 3.5

    8.0-10.5

    1.0-2.0

     

    Fineness

    Specific Surface Area: according to standard GB/T 8074-2008:

    Specification limit: ≥460 m2/kg.

    Mineral composition

    C=CaO, A=Al2O3, S=SiO2 , F=Fe2O3,  S =SO3

    −Principal mineral phase: calcium sulphoaluminate C4A3S-

    −Secondary phases: C2S, C4AF

    Notes: This information is given for reference only.

  • Application

    Advantages by using LIGHT COLOR CSA BINDER:

     •    The color of this CSA BINDER is more lighter than other cement, can be easily colored by pigment.

     •    Hydrated products have hydration alumina gel and ettringite crystals which can generate beautiful luster on surface of the artificial stone.

     •    Hydrated products of CSA BINDER are hydration alumina gel, ettringite crystals and hydrated calcium silicate, can avoid the strength decreasing.

     •    CSA BINDER is a low alkali cement, can avoid the re-alkali.

     •    Hydrated products ettringite crystals, is an expansive crystalline substance which is formed very stable over time, can avoid the cracking and shrinkage.

     •    CSA BINDER is also a low CO2Emissions cement

     •    Rheology Adapted to the Application

     •    Sulphate Resistance

     •    etc.

Method

Use of Additives

LIGHT COLOR CSA BINDER may be used in combination with chemical additives such as:

The following additives might be used in combination with LIGHT COLOR CSA BINDER when making artificial marbles and counter tops.

-  Dispersible polymer powders

-  Cellulose class thickening agent

-  Retarder

-  Accelerators

-  Plasticizers/superplasticizers

-  Pigments

Storage
Storage:
LIGHT COLOR CSA BINDER is normally supplied in one-tonne bag which include a moister resistant barrier. However, in common with all hydraulic binders LIGHT COLOR CSA BINDER must be kept from moisture, and can retain its properties for up to six months when properly stored.
Images

Download